Skip to content

Implements Direct Implements Direct

1P24 PTO Stump grinder for Compact tractors

Baumalight

$6,395.00 NZD inc GST

$5,560.88 NZD exc GST

Baumalight 1P24 3 Point Hitch PTO  Stump Grinder For hydrostactic compact tractors.

OVERVIEW

The 1P24 PTO stump grinder is designed for small tractors equipped with hydrostatic drive and Category 1, 3 point linkage.. This tractor mounted stump grinder model allows you to grind small and midsized stumps efficiently with a 24" Rotor, carrying 34 replaceable carbide teeth and has a cutting depth of 10" above ground and 6" below ground. With no hydraulics required this versatile PTO Stump Grinder is controlled with gravity feed which is ideal for tractors with no hydraulic remotes.

FEATURES AND BENEFITS

Made in Canada

- Quick Hitch Compatible The  1P24 Stump Grinder is CAT 1 Quick Hitch compatible, allowing you to easily connect to your compact tractor

- Slip Clutch  Protection. The 1P24 Stump Grinder includes a slip clutch PTO shaft. In the event that the grinder hits a rock, the slip clutch is designed   to slip  so that the shaft is not damaged. 

-Self Regulating Feed .For smoother operation, the 1P24 3-point hitch stump grinder features a self-regulating feed function that uses the weight of the grinder head. If you suddenly advance your tractor while grinding, a hinge will automatically swing the grinding head out a bit, keeping even pressure on the stump.

 -Carbide tipped teeth.Like the finest saw blades, the cutting teeth on Stump Blasters are carbide tipped. This incredibly hard material ensures reliable cutting performance. When grinding stumps, buried hazards are inevitable; gravel, stones even metal posts are not uncommon to “find”. Our carbide teeth are designed to stand up to this abuse and keep on blasting stumps to dust.

-6 free Teeth. All 1P24 Stump Grinder comes with a free set of 6 replacement teeth. These replacement teeth are conveniently shipped in a robust enclosed compartment on top of the frame.

-Rotor. The massive ¾" thick steel rotor provides the back bone for the Stump Blaster cutting system. It’s the anchor for the carbide tipped teeth. For smooth operation it’s important that the rotor remains solid, with no flexing. The rugged rotor also provides the Stump Blaster with the extra momentum needed when the grinding is tough, making sure the Stump Blaster can power through the hardest stumps

- More clearance. The Stump Blaster’s carbide teeth extend a full 1-¼ inches from the rotor. This prevents chips and mulch from getting plugged. More  chip clearing produces smoother operation and reduces heat build-up that can damage the rotor and cause premature tooth failure

-Greasable pins. Our grease pins are zinc plated to prevent corrosion which will allow for smoother operation of the units joints over their lifetime

 Does your tractor require our Extension kit ?

Tractor must have hydro-static drive. On subcompact tractors with short arms, the D005735 Extension kit is required. 
Before using the 1P24 Stump Grinder, you must first measure your compact tractor to see if you require our D005735 Extension kit

Click here to learn how to measure

Specifications Units
 Tractor HP 20-45HP
Transmission Hydrostatic
Gpm Hydraulic
Rotor size 24" 609mm
Number of teeth 34
Tooth Construction Carbide Bolt on
Cutting wheel speed 540 RPM
Cutting Height above ground

10" /250mm 

Cutting Depth below ground 6" /150mm
Max cutting depth per pass 5". /125mm 
Max horizontal cut 22"
Swing arc 0
Over torque protection Slip clutch
Linkage Category 1
Quick hitch compatible yes
Remotes for hydraulics 0
Shipping weight 350lbs 158 KG
Width 930mm
Length 800mm

 1P24 Stump Grinder Operator’s Manual

Search