Overview

Novaquip bolt-on 3-point linkage with hydraulic lift. Category 1 3-point linkage which can be bolted onto a tractor chassis or similar, featuring its own hydraulic ram which lifts the 2 adjustable linkage arms up or down. This unit would let you easily mount a 3-point attachment onto the front of your tractor, such as a tipping dirt scoop, grader blade, or pallet fork etc. There are some manual top link options we can offer to go onto this also.

Features & Benefits

• Around 300mm of vertical travel in the linkage balls, with the arms coming up to about 90° when the ram is fully retracted
• The mounting point for the hydraulic ram can be moved up or down about 50mm also
• Linkage arms are 420mm from the centre of the pivot pin to the ball that the implement pin attaches to
• Linkage arms spread from 400-750mm centres in width for pickup of implement pins (680mm being common pin spacing)
• 420mm from the lower link pivot point to the top link pin centres, with multiple holes for positioning the top link pin depending on where the hydraulic cylinder is mounted
• Back mounting plate has mounting slots 150mm centres, 220mm long, vertical orientation
• Sister plate bolted onto the back mounting plate, which could be welded to the front of the tractor or sandwiched onto the front cross member/bumper with longer bolts
• Manual top link options available on request

Specifications

Compatibility

Category 1 3-point linkage, bolts onto tractor chassis or similar.