Skip to content
Implements Direct Implements Direct

IODD750A Multi Spreader with Side Dressers

Iris

$11,995.00 NZD inc GST

$10,430.44 NZD exc GST

Iris IODD750SC Multi Spreader with twin side dressing attachments allows you to apply fertiliser, gypsum, lime or mulch under rows of trees/vines on each side of the tractor in 1 pass. This one machine will spread it all! It is the perfect all-round solution for spreading lime, composts and manures, sand, Granular fertiliser and woodchip etc.

FEATURES AND BENEFITS:

  • Quick and easily removable side dressing attachments but also includes standard deflector 180 broadcast spreading
  • The twin stainless steel spinners are hydraulic driven.
  • Spinner speed controls the spreading width (hydraulic flow controller fitted for adjusting)
  • The shutter system is hydraulic controlled
  • Shutter 1 works is a large opening for controlling manure, compost and larger materials
  • Shutter 2 has butterfly openings to control granular-type fertilisers

Auger and agitator system:
The twin feed auger pulls the materials into the hopper. The agitator stops the bridging of material to ensure smooth flow.
Both are driven by hydraulic motors and have variable speed adjustments to control the feed rate.

This machine will require a minimum of 2 pairs of hydraulic services to operate 1 service to run the spinners, feed auger and agitator. Another service to run is either the granular shutter or compost shutter, depending on your spreading.

Specifications

Units

Overall Width

 1800mm

Hopper Width

 1570mm
Length 1380mm
Height from ground 1330mm

Capacity

 970L (0.97 m3)
Weight (empty) 300kg
Spreading diameter 180 degrees, 8-24 m range
Attachment 3 Point Linkage CAT 1-2
Spinner and shutter system (stainless steel) Hydraulic
Auger and aggitator Hydraulic
Hopper material

Stainless steel

Fertiliser & Multi Spreaders — Common Questions

Can I spread lime as well as fertiliser?

Multi spreaders are built to handle lime, compost and fertiliser; a spreader marketed purely as a fertiliser spreader may not have wide enough spread vanes or a strong enough drive for lime's density and clumping tendency. Check the individual listing if you need to spread more than one material type.

Ground-drive or PTO-driven — what's the difference?

Ground-driven spreaders use the wheel rotation to drive the spinner, so spread rate is tied to your travel speed — simple and reliable, but less precise. PTO-driven spreaders run off the tractor's PTO independent of ground speed, giving more consistent spread rate control, particularly useful on hilly or uneven ground where travel speed varies.

What hopper capacity do I need?

Match hopper size to how much area you're covering per fill, balanced against what your tractor can safely carry on the linkage — an oversized hopper full of fertiliser can overload a smaller tractor's rear lift capacity.

How do I get an even spread pattern?

Spread width and evenness depend on ground speed, PTO speed (for PTO-driven units) and the spreader's vane/disc setting — check the product's spread chart if supplied, and do a test run on a tarp to check pattern before spreading a full paddock.

Search