Overview
Novaquip bolt-on 3-point linkage with hydraulic lift. Category 1 3-point linkage which can be bolted onto a tractor chassis or similar, featuring its own hydraulic ram which lifts the 2 adjustable linkage arms up or down. This unit would let you easily mount a 3-point attachment onto the front of your tractor, such as a tipping dirt scoop, grader blade, or pallet fork etc. There are some manual top link options we can offer to go onto this also.
Features & Benefits
- Around 300mm of vertical travel in the linkage balls, with the arms coming up to about 90° when the ram is fully retracted
- The mounting point for the hydraulic ram can be moved up or down about 50mm also
- Linkage arms are 420mm from the centre of the pivot pin to the ball that the implement pin attaches to
- Linkage arms spread from 400-750mm centres in width for pickup of implement pins (680mm being common pin spacing)
- 420mm from the lower link pivot point to the top link pin centres, with multiple holes for positioning the top link pin depending on where the hydraulic cylinder is mounted
- Back mounting plate has mounting slots 150mm centres, 220mm long, vertical orientation
- Sister plate bolted onto the back mounting plate, which could be welded to the front of the tractor or sandwiched onto the front cross member/bumper with longer bolts
- Manual top link options available on request
Specifications
| Specification | Value |
|---|---|
| Weight | 40 KG |
| Sizes | 500mm x 500mm x 500mm |
| Tractor Linkage | Category 1 |
| Finish | Powder coated steel |
| Linkage Arm Length | 420mm (pivot pin centre to ball) |
| Linkage Width Range | 400-750mm centres |
| Vertical Travel | Approx. 300mm |
| Mounting Slots | 150mm centres, 220mm long, vertical orientation |
Compatibility
Category 1 3-point linkage, bolts onto tractor chassis or similar.