Skip to content

Implements Direct Implements Direct

Lower Link Pin Cat 1 (22mm x110mm)

Implements Direct

$8.00 NZD inc GST

$6.98 NZD exc GST

Lower Link pin  Category I  110 mm

This  type of pin is used on some implements lower connection to the tractor lift arms. The would normally beused in a clevis linkage where it is going through  holes 2 plates  once each side of the lift arm ball . Typically used on an implement for a tractor that is also category one  thats 22mm diameter (7/8") , the useable length is the 110mm thats measured between the head and the locking pin hole 

Diameter  22mm
Useable Length 110mm
Overall Length 138mm